Construct A Wood Storage Bench Organize your garden hoses with stylish outdoor furniture that cleverly hides them beneath a lift-open seat. An outdoor bench is a convenient place to sit while removing muddy boots. You’ll sleep better knowing it can hold a garden hose (or two) and other unsightly supplies.

You can buy a bench that matches the style of your home, but finding an affordable one may be more complicated than it appears. You can also build one out of weather-resistant cedar or ipe.

Lift the seat to reveal a hardware cloth floor and a galvanized metal screen that allows water to escape, eliminating the need to store a wet towel. Hose before draining it. With its decorative curve, the angled backrest contributes to the inviting aesthetic of a piece that is as attractive as it is functional. Find out how to make the piece.

Overview Shopping List for How to Build a Porch Storage BenchOverview Shopping List for How to Build a Porch Storage Bench

1. cedar 1×6 boards

Take eight 8-foot boards and rip two and a half of them to 1×5 dimensions (actual size: 4½ inches). Get one 6-foot board. *This is also a great project to do with leftover deck boards. Objective remembers to account for the extra thickness of the 12 lumber.

2. cedar 1×2 boards

To make the cleats, gather two 6-foot boards.

  1. Hardware fabric
  2. 1¼ inch stainless-steel trim head deck screws

5 1/2 inch staples

Step 1: Make the Cuts

Following the cut list, cut your cedar stock into assembly pieces. Cut an arch across the upper backrest board with a jigsaw. To make the backrest slope, mark and cut an angle into the top half of two back-leg pieces.

Step 2: Construct the Legs

Fasten the front leg pieces to form an L, with the front board overlapping the edge of the narrower sideboard. Next, build the back legs by overlapping the edge of the rear panels and angling the edges forward.

Step 3: Put the Bench Base Together

Install a 12 cleat flush with the bottom edge of the baseboards. Fasten two longboards together to form the base, the inside of the front legs, and two more to the back legs, all at the same height from the ground. Fasten the side pieces to the legs by sandwiching them between the front and back pieces. Drill a hose hole in the back.

Cut and insert the Hardware Cloth in Step 4

Although, Cut the hardware cloth with tin snips and staple it to the 12 cleats with a staple gun and 12-inch staples.

Attach the Seat and Backrest in Step 5

Although, Connect the stationary hinge strip to the back legs. To keep the seat boards together, secure two battens across the underside. Next, attach a piano hinge to the front and back edges of the hinge strip and the seat. Finally, attach the backrest boards with screws to the angled front edge of the back legs, and secure the lid with a hook-and-eye latch.


Although, Storage Bench – Buy Storage Bench Online in India at the Lowest Prices on Also, Some bench designs with storage include Christie, Charles, Emboss, Petrona Benches with Storage, and Corvo. Some plans require the seat to be lifted, while others have cabinets. Construct A Wood Storage Bench.

Related searches

[storage bench with seating]

[wooden bench]

[storage bench with cushion]

[storage bench for bedroom]

[storage bench india]

[storage bench ikea]

Also read: Convertible Shelf Table online